Audio Control LC7i Guia de Instalação descarregar pdf

page 1

Six Channel Line Output Converter

with Multi-Channel Equalization and AccuBASS™

The LCQ-1 is your gateway to amazing sound from a factory head unit. It

is a compact, six-channel, high-performance, OEM

line output converter with independent multi-

channel equalizers to custom tune the system.

AudioControl’s patent pending AccuBASS™

compensation corrects for the factory bass

roll-off present in many of today’s cars.

In short; the LCQ-1 can make every car

sound amazing.

If you want even more, add the

optional dash mounted level control

(ACR-2) which allows control of the

subwoofer output. The ACR-2 will

also operate as an in/out switch for the

EQ section. Very handy addition!

Key Features of The LCQ-1

Here are some of the cool things that your LCQ-1 does:

• Independent Front, Rear, and Subwoofer equalizers let you custom tune

your system

• AccuBASS™ bass compensation, so you can correct for the factory bass

roll off, Patent Pending

• GTO™ - signal-sensing inputs to turn the LCQ-1 on automatically

• Channel summing lets you eliminate any factory-installed active

crossovers

• Active speaker-level inputs accept high power factory amplier outputs

• AutoMode Inputs turn 2 inputs into 3 outputs

• Compact size for quick, easy installation

• Input for optional ACR-2 remote mounted bass level control

• Bulletproof 5 year warranty (When installed by an authorized

AudioControl dealer)

Quick Install Guide

Since some of you will want to install your LCQ-1 on your own we offer a

few reminders in the following short section to speed up your installation of

the: You should also refer to diagrams on page 9 and 10 as guidelines.

➊ Physically mount the LCQ-1 in a location that keeps it away from soda

spills, food crumbs, and curious ngers. Select a location that allows you ac-

cess to the top panel equalization controls.

➋ The LCQ-1 needs to be installed in the signal path between your OEM

source unit (or factory amplier) and after-market amplier(s) and/or

processor(s). Do not connect the LCQ-1 between the factory head unit and

the factory amplier. Locate the amplied speaker wires that are coming from

your factory source unit and/or amplier and connect them to the speaker-level

inputs on your LCQ-1. In many cases you can nd factory speaker leads in the

rear of the vehicle or at the factory amplier that are easy to access.

Note: If your source unit has front, rear, and subwoofer speaker-level out-

puts, connect them to the three sets of inputs on your LCQ-1. If the source unit

only has front and rear outputs, the Auto Mode circuitry in your LCQ-1 auto-

matically routes the Channel 2 input channels to the (Channel 3) subwoofer

channels.

➌ Use RCA connecting cables to connect the RCA outputs of the

LCQ-1 to your after market amplier(s). If this is not obvious to you, quickly

pack up your LCQ-1 and run to your nearest authorized AudioControl dealer to

have them perform the installation. You will thank us later.

➍ Connect +12 power, and ground. Note: The LCQ-1 has a 12-volt trigger

input but normally you will just let the GTO turn on circuit take care of that by

itself.

➎ Connect your amplier trigger input to the 12-volt trigger output of the LCQ-1.

➏ Turn your amp gains fully down before turning on the system.

➐ Turn on the system and level match your LCQ-1 to your source unit, signal

processor and ampliers. For more help see our technical videos at

http://www.audiocontrol.com/t34/Mobile-Audio.html

➑ Set your equalization controls so the system sounds amazing. See page 9

for more details.

If you have your authorized AudioControl dealer install your LCQ-1, we

will extend the normal one-year warranty to a full ve years. AudioControl

products are, by nature, more technical than many others and we spend a good

deal of time training our dealers and installers so we know our products will

be installed correctly. We do this so you will get the best possible results from

your AudioControl purchases. For the best results this tuning should be done by

Making Good Sound Better

Want to know more? See the “Awesome Information” section, page 8

…it’s all there!

1 2 3 4 5 6 7 8 9

Resumo do Conteúdo

Página 1 - Quick Install Guide

page 1Six Channel Line Output Converter with Multi-Channel Equalization and AccuBASS™ The LCQ-1 is your gateway to amazing sound from a factory hea

Página 2 - A Guided Tour of LCQ-1

page 2A Guided Tour of LCQ-1➊ Speaker-level Inputs: The LCQ-1 has six speaker-level inputs. These inputs get their signals from the speaker-level out

Página 3

page 3➊➋➌➐➏➎➍➑➒➓ Pre-Amp Outputs: These are the RCA plugs on the output side and should be connected to the next component after the LCQ-1, such as

Página 4 - Awesome Information

page 4Under the Covers - Internal JumpersHere are the internal jumpers that allow you to customize your LCQ-1 for your particular installation.➊ Outpu

Página 5 - More Highlights

page 5More HighlightsSummable OutputsThe LCQ-1 has the capability to combine together multiple (2, 4, or 6) input signals from the factory source unit

Página 6

page 6Serious Sound for Classic Rock, Bands, Music, or JazzUnlimited System PossibilitiesSerious Sound for High SPL Systems

Página 7 - Equalization Adjustment

page 7Serious Sound Quality System Using Summing FunctionsEqualization AdjustmentWhen it comes to music, everyone has his or her own particular taste.

Página 8 - LCQ-1 SPECIFICATIONS

page 8Block Diagram of the LCQ-1Feeling lost? Here’s an internal “roadmap” to help you out. This simplied block diagram is a map of the paths your si

Página 9 - The WARRANTY

page 9The WARRANTYPeople are scared of warranties. Lots of ne print, months of waiting around. Well, fear no more, this warranty is designed to make

Comentários a estes Manuais

Sem comentários

Audio Control LC7i Guia de Instalação

Consulte online ou descarregue Guia de Instalação para Equalizadores Audio Control LC7i. Audio Control LC7i Install guide Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais